Fujitsu primergy TX150 User Manual page 247

4
Use the [↑] [↓] keys to select the hard disk to be formatted physically. Press the
[Space] key to set it.
5
Press the [Tab] key to move to the [Format] button. Press the [Space] key.
A confirmation message is displayed.
6
Read the message, select [Format] again, and press the [Space] key.
Physical formatting starts.
When the physical formatting completes, a completion message appears.
7
Check that [Failed Formatting Drive(s)] indicates "none". Select [Exit] and press
the [Space] key.
8
Select [Exit] again and press the [Space] key.
The physical formatting has completed when the DOS prompt appears.
The server can be turned off.
PRIMERGY TX150 S4 User's Guide
8
247