Scsi Setup Utility; Starting And Exiting The Scsi Setup Utility - Fujitsu primergy TX150 User Manual

Chapter 8 Configuring Hardware and Utilities

8.3 SCSI Setup Utility

This section explains settings for the SCSI Setup Utility and items regarding each
setting.

8.3.1 Starting and Exiting the SCSI Setup Utility

The following explains how to start and exit the SCSI Setup Utility.
■ How to Start the SCSI Setup Utility
1
During server startup (POST), press the [Ctrl] + [C] keys while the message
"Press Ctrl-C to Start Symbios Configuration Utility..." is displayed on the
screen.
The SCSI Setup Utility starts up.
LSI Logic MPT SCSI Setup Utility Version MPT BIOS-IME-x.xx.xx
<Boot Adapter List> <Global Properties>
LSI Logic Host Bus Adapters
Adapter
<1020/1030
<1020/1030
F1 =HELP
Esc=Abort/Exit
F2 =Menu
2
Set items as necessary.
●
Changing Settings
1
Use the [↑] [↓] [←] [→] keys to select the item whose setting is to be changed.
The [↓] and [↑] keys move the cursor up and down, and the [←] and [→] keys move the cursor to
the left and right.
2
Press the [Enter] key.
When an item with a submenu is selected, the submenu appears. When an item without a
submenu is selected, the setting is changed.
238
PCI Dev/ Port IRQ
Bus Func Number
2 40> 3000 11
2 41> 3400 9
ArrowKeys=Select Item
Home/End=Select Item
NVM Boot LSI Logic
Order Control
Yes 0 Enabled
Yes 1 Enabled
-/+ =Change [Item]
Enter=Excute <Item>
RAID
Status
--
--