Configuring Raid - Fujitsu primergy TX150 User Manual

■ Configuring RAID

1
Select [Mass Storage Controller View] on the [Configuration for Disks and RAID
Controllers] window.
Click [Details]. As the default values are configured, confirm the settings and modify them as
necessary.
Add partitions as necessary.
One hot spare (standby disk) can be configured. When the hot spare disk is set to "Yes", set
the number of disk units to the number of installed disk units minus 1.
E.g.: When four hard disk units are installed, set the RAID level to "RAID5", and when the hot
spare disk is set to "Yes", set the number of disk units to "3".
Add a partition
1. Click [Add Partition].
A partition is added.
Add required partitions.
PRIMERGY TX150 S4 User's Guide
3
65