Fujitsu primergy TX150 User Manual page 121

4
The [Windows Server 2003 x64 Setup] window appears.
Immediately, the following message appears at the bottom of the window. Press the [F6] key.
Press F6 if you need to install a third party SCSI or RAID
driver ...
This message will be displayed for a short time after the setup window (blue screen) appears.
Press the [F6] key immediately after the window turns blue.
5
When configuring the array system using the SCSI array controller card, install
the Drivers for SCSI array controller card manually.
1. When the following message appears, press the [S] key.
To specify additional SCSI adapters, CD-ROM drives, or
special disk controllers for use with Windows, including
those for which you have a devicesupport disk from a mass
storage device manufacturer, press S.
2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, insert the driver disk created from the driver's
CD and press the [Enter] key.
The following message appears.
You have chosen to configure a SCSI Adapter for use with
Windows, using a device support disk provided by an
adapter manufacturer.
Select the SCSI Adapter you want from the following list,
or press ESC to return to the
previous screen.
3. Select following item and press the [Enter] key.
MEGARAID SCSI 320-0X RAID Controller Drive
4. When the following message appears, press the [S] key.
The driver you provided seems to be newer than the Windows
default driver. Windows already has a driver that you can
use for "MEGARAID SCSI 320-0X RAID Controller Driver"
Unless the device on the floppy disk, you should use the
driver in Windows.
5. Follow the instructions in the window to perform installation
The message which prompts you to set the floppy disk appears during the installation, set
the driver disk and push the [Enter] key.
6
Follow the instructions from the setup program to continue the installation
procedure.
If a message indicating that the driver has not passed Windows Logo testing to verify its
compatibility with Windows appears, select [Yes] to continue the installation procedure.
PRIMERGY TX150 S4 User's Guide
4
121