Rev 1 Nov.14
16. Select Use default gateway on remote network.
17. Click OK.
Tip:
You may want to check the Options tab and change the settings for applications you
use. The default options are generally applicable for most uses.
Caution:
Unless specifically directed to do so by Support or your network administrator,
you do not need to make any changes to the options on the Security tab.
18. Click OK until you return to the Connect window.
19. Log in to ACEmanager and go to Serial > Port Configuration.
Figure 1-28: ACEmanager: Serial > Port Configuration
20. Under Port Configuration:
a. Set the Flow Control field to Hardware.
b. Set the DB9 Serial Echo field to Disable.
21. Click Apply and reboot the device.
Connection settings
1. To set the default connection:
2. Go to Start > Control Panel > Network and Sharing Center.
265