ALEOS 4.4.0 Software Configuration User Guide
294
AT commands are shown in upper case, but they are not case sensitive.
This appendix organizes the commands into functional groups to allow you to
more quickly locate a desired command when you know the operation but not the
command. Commands under each topic are listed alphabetically.
Note: Some of the configuration commands listed here are only available as AT
commands.
Reference Tables
Result codes are not shown in the command tables unless special conditions
apply. Generally the result code OK is returned when the command has been
executed. ERROR may be returned if parameters are out of range, and is
returned if the command is not recognized or is not permitted in the current state
or condition of the AirLink device.
Note: Unless otherwise stated, all commands are accessible locally and remotely.
AT command topics in this appendix:
•
Standard (Hayes) commands
•
Device Updates
on page 295
•
Status
on page 295
•
WAN/Cellular
on page 299
•
LAN
on page 304
•
VPN
on page 307
•
Security
on page 312
•
Services
on page 313
•
Serial
on page 320
•
I/O
on page 330
•
Applications
on page 330
•
Admin
on page 331
on page 324
4116359