ALEOS 4.4.0 Software Configuration User Guide
Table 12-1: I/O: Current State
Command
Digital Input 1 value
234
For more information on setting up reports, see
on page 197.
Relay outputs
You can use relay outputs to trigger an intermediary switch and change the state
of equipment.
Current State
The Current State screen allows you to view the current values (as of the last
refresh) of analog and digital inputs, pulse counts for digital inputs, and raw and
transformed values for analog inputs. You can also use this screen to change the
current values for Relay outputs. This change occurs immediately without a
reboot.
Figure 12-1: ACEmanager: I/O > Current State
Description
Displays the current value for the digital input:
•
0 —Open
•
1 —Closed
Digital input 1 displays the value for Pin 4 on power connector.
You can also use an AT command to read these values. See
page 330.
Events Reporting Configuration
*DIGITALIN1?
on
4116359