ALEOS 4.4.0 Software Configuration User Guide
Table C-2: WAN / Cellular AT Commands
Command
*SIMPIN
*SIMPINENABLE
Table C-3: LAN AT Commands
Command
*DHCPHOSTEND
*DHCPNETMASK
*DHCPSERVER
*DNS1?
*DNS2?
*DNS1V6?
*DNS2V6?
304
HSPA and LTE fallback to HSPA only
Query or enter the SIM pin.
AT*SIMPIN? to query
AT*SIMPIN=n to enter the SIM pin
HSPA and LTE fallback to HSPA only
Query or set the SIM pin.
AT*SIMPINENABLE? to query
AT*SIMPINENABLE=n to set
•
n=0—Don't change
•
n=1—Enable (SIM pin required on startup)
•
n=2—Disable
LAN
Note: A reboot is required before these commands take effect.
Description
Query or set the ending IP address for the Ethernet DHCP pool
AT*DHCPHOSTEND? to query
AT*DHCPHOSTEND=d.d.d.d to set
•
d.d.d.d=last IP address in Ethernet DHCP pool
Query or set the Ethernet DHCP subnet mask
AT*DHCPNETMASK? to query
AT*DHCPNETMASK=d.d.d.d to set
•
d.d.d.d=Ethernet DHCP subnet mask
Query or set the Ethernet DHCP server.
AT*DHCPSERVER? to query
AT*DHCPSERVER=n to enable or disable the DHCP server mode
•
n=0—Disable
•
n=1—Enable
Query the primary DNS (*DNS1) and secondary (*DNS2) IP addresses.
AT*DNS1? to query DNS1
AT*DNS2? to query DNS2
Query the primary IPv6 DNS (*DNS1V6) and secondary (*DNS2V6) IP addresses.
AT*DNS1V6? to query DNS1V6
AT*DNS2V6? to query DNS2V6
Description
4116359