Field
Serial bytes received
Serial Signal Level
Rev 1 Nov.14
Description
Number of bytes received over serial port from host
Status of the following parameters related to the host signal level:
•
DCD—Data Carrier Detect—Control signal to the PC
•
DTR—Data Terminal Ready—Used to establish a connection
•
DSR—Data Set Ready—Used to establish a connection
•
CTS—Clear to Send—Data flow control
•
RTS—Request to Send—Data flow control
Each parameter can have a value of LOW (signal not asserted) or HIGH (signal being
asserted).
The first three parameters (DCD, DTR, and DSR) may be helpful for troubleshooting. If the
values shown for these parameters are not as expected:
1.
Press Refresh to ensure you have the latest values.
2.
Check the cable connections.
Note: ACEmanager does not update dynamically. Press Refresh to view the current
values.
Applications
The Applications section of the Status group provides information on the status of
data service.
Figure 3-10: ACEmanager: Status > Applications
Status
63