Configuring The Airlink Ls300; Connection Ports; Configuring With Acemanager - Sierra Wireless AirLink LS300 User Manual

3: Configuring the AirLink LS300

Rev 4 Sep.13
This chapter shows you how to communicate with and configure the
Sierra Wireless AirLink LS300.

Connection Ports

You can connect to the device's:
• USB port (Micro B)
• Ethernet port (RJ-45)
• Serial port (9-pin RS-232)
USB Port
The USB port can be either a:
• Virtual Ethernet port
• Virtual serial port
Drivers must be installed on the PC for it to work in either mode. They
are available for download at
Support/Downloads.aspx.
We recommend you:
• Use a USB 2.0 cable
• Connect directly to your computer for best throughput.

Configuring with ACEmanager

Note: For all of the configurable features available in ALEOS, see the
ALEOS Configuration User Guide.
AirLink devices are highly configurable when using the embedded
ALEOS™ software. ACEmanager is a free utility included with every
AirLink device. To access it:
1. Connect a laptop to the device with an Ethernet cable.
2. Start a web browser.
3. In the browser's address bar, enter the IP address:
http://192.168.13.31:9191.
4. The login screen appears. Enter your name and password. The
administrator user name is user and the password is 12345.
http://www.sierrawireless.com/en/
3
27