Page 2
Important Notice Because of the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless device are used in a normal manner with a well‐ constructed network, the Sierra Wireless device should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless device, or for failure of the Sierra Wireless device to transmit or receive such data. Safety and Hazards Do not operate the Sierra Wireless device in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, near life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Sierra Wireless device MUST BE POWERED OFF. The Sierra Wireless device can transmit signals that could interfere with this equipment. Do not operate the Sierra Wireless device in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sierra Wireless device MUST BE POWERED OFF. When operating, the Sierra Wireless device can transmit signals that could interfere with various onboard systems. Limitation of Liability The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless or its affiliates. SIERRA WIRELESS AND ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY ...
2. Turn unit on and install the latest version of ALEOS SW (downloaded from support area of the Sierra Wireless web site). This is required for the new WiFi card to work properly and to detect the WiFi card when it is installed.
Page 6
4. Remove the black cover, exposing the expansion card slot in the middle of the unit. Make sure the model number on the WiFi upgrade kit cover matches the model number on the cover you remove. 5. Make sure there are no internal antenna wires which would interfere with the card sliding in the expansion card slot, if there are, gently move them out of the way.