List Of Sms Commands - Sierra Wireless AirLink ES440 User Manual

ALEOS 4.4.0 Software Configuration User Guide
Command
Note: Some responses start with "reply from [device name]:" However, this feature is currently unavailable for the
Enable, and Provision commands.
[prefix]enable <value>
[prefix]status
[prefix]reset
[prefix]relay x y
[prefix]Provision <APN> <Network
User ID> <Network Password>
Note: You can omit any of the above
fields by using a leading or single period
(.) for that parameter.
Note: Use of this command is valid for
LTE, HSPA, and GPRS networks, but not
valid for CDMA only networks.
336

List of SMS Commands

Action
Enable/disable the device(s)
being managed by AVMS.
None
Resets the device 30
seconds after the first
response message is sent.
Sets the applicable relay to
the desired setting.
After the unit is installed and
the SIM card inserted, you
can use this command to
provision the account.
Result
"AVMS enable set to status:" <value>
<value>=0 Disable
<value>=1 Enable
status IP
[Network IP] [Network Status]:
[technology type] RSS signalled
Lat = [Latitude]
Long = [Longitude]
Time = [hh:mm:ss]
First message: Reset in 30 seconds
Second message: Status message when
back up.
relay x set to y
x can be 1
y can be 0 or 1 (Off or Drive active low)
"provision"
"apn:" <APN>
"user ID" <Network User ID>
"PW" <Network Password>
4116359