Updating Only The Radio Module Firmware - Sierra Wireless AirLink ES440 User Manual

ALEOS 4.4.0 Software Configuration User Guide
40
Using AirVantage Management Service (AVMS) to Update One
or Multiple AirLink Devices Over-the-Air
You can use AirVantage Management Service to update the ALEOS software and
radio module firmware over-the-air on one or multiple AirLink devices.
If you don't have an AVMS account:
1. In ACEmanager, go to the Services tab and ensure that AVMS is enabled and
the server URL is http://na.m2mop.net/msci/com. If this is not the case, enter
the correct URL, click Apply and then click Reboot.
2. Go to www.sierrawireless.com/en/productsandservices/AirVantage_M2M_-
Cloud/Management_Service.aspx
trial account, go to
Updating to ALEOS software with an AVMS account:
1. Go to http://na.airvantage.net/start
2. Follow the instructions in the online AVMS documentation to update the
ALEOS software and radio module firmware.

Updating Only the Radio Module Firmware

Note: Sierra Wireless recommends that you do NOT update only the radio module
firmware unless advised to do so by Sierra Wireless or an authorized distributor.
If you are updating only the Radio Module Firmware:
1. Select the Radio Module Firmware button
2. Select the appropriate firmware file for your device and click Update. If you
select a file for radio module firmware that is not supported on your device,
you will see a warning message similar to the following:
Unless you have been advised by Sierra Wireless to do so, we recommend
that you do not install an unsupported version of the radio module firmware.
3. Click Update.
for more information. To sign up for a free
http://na.airvantage.net.
and log in.
4116359