ALEOS 4.4.0 Software Configuration User Guide
340
Port Forwarding
I set up port forwarding rules. I did not receive an error message, but
it seems that data is not being forwarded.
If the Public Start Port and Public End Port fields are not set up correctly, data is
not forwarded.
1. In ACEmanager, go to Security > Port Forwarding.
•
If you are forwarding data to a single port:
· Ensure that the value in the Public Start Port field is not 0.
· Ensure that the value in the Public End Port field is 0.
· Ensure that the value in the Private Port start field is not 0.
•
If you are forwarding data to a range of ports:
1. Ensure that the value in the Public Start Port field is not 0.
· Ensure that the value in the Public End Port field is greater than the value in
Public Start Port field.
· Ensure that the value in the Private Port Start field is not 0.
For complete instructions, see
ALEOS Application Framework (ALEOS AF)
I'm unable to load an application from ALEOS AF.
1. In ACEmanager, go to Services > Telnet/SSH.
2. In the AT Server Mode field, select Telnet.
3. Click Apply.
4. Re-try loading the application from ALEOS AF.
SMS
I tried to send an SMS message, and received an error code. What
does the error code mean?
The following acknowledgment error codes may appear if your message was not
successfully sent:
Code: Explanation:
100
Not in coverage (no cellular service)
201
Parse Error on field #1 (Start Field)
202
Parse Error on field #2 (Phone number and separator)
203
Parse Error on field #3 (Data type and separator)
204
Parse Error on field #4 (Payload length and separator)
205
Parse Error on field #5 (Message and End Field)
301
No buffers available
Port Forwarding
on page 141.
4116359