Action Types - Sierra Wireless AirLink ES440 User Manual

ALEOS 4.4.0 Software Configuration User Guide
200
c. Select the Event Operator and choose the parameters.
The parameters vary depending on the Event Type and Event Operator
chosen. For more information, see
7. Associate the Action with the Event:
a. Under Action Description, select the check box beside the name of the
action you want to associate with the new event.
8. Click Apply.

Action Types

Note: You can define a maximum of 5 Actions.
Note: If you select Email or SNMP TRAP as the Action Type, be sure that these options
are configured on the Services tab. Go to Services > Email (SMTP) or Services >
Management (SNMP).
Under the Events Reporting Action tab, the Action Type drop-down menu shows
the Action Types available for the device you are configuring.
Figure 9-4: ACEmanager: Events Reporting > Action > Action Type drop-down menu
There are several ways to send a report. The configuration varies.
Email
• To — The email address where the report should be sent.
• Subject — The subject that should be displayed.
• Message — The message you want included with each report.
• Body Type — Select message in ASCI Text, SVS SCI and XML.
• Test report — Use to send a test report. After you have updated all the fields
and clicked the Apply button, wait about 1 minute, and then click the Test
report button.
Note: If you are using Email as the Action for an Event, you must also configure the email
server settings on the Services > Email (SMTP) tab and reboot the device. See
(SMTP) on page 182.
Table 9-1 on page 204.
Email
4116359