Lte Networks - Sierra Wireless AirLink ES440 User Manual

Error message
[HTTP] Out of memory
[HTTP] SSL peer certificate or
SSH remote key was not OK
AVMS Server Errors
[AVMS] HTTP error '500'
Error message indicating a failure when parsing a valid AVMS server response
XML processing error
a. AVMS technical support:
Rev 1 Nov.14
Meaning
A memory allocation problem
occurred.
This message appears if you are
using an HTTPS server URL, the
SSL Verify Peer Certificate
set to Enable, and the server SSL
certificate validation fails. If this
happens, communication with the
AVMS server is terminated.
AVMS server reported error 500 in
the HTTP response.
The content of a valid AVMS server
response cannot be parsed.
https://issues.m2mop.net

LTE Networks

How do I interpret the number shown in the Band Class field on the
Status > WAN Cellular page for a device on an LTE network?
Use the following table to interpret the values in the LTE Band Class field in
ACEmanager (STATUS > WAN Cellular).
Band Class Uplink frequency range
number
120 1920–1980
121 1850–1910
122 1710–1785
123 1710–1755
124 824–849
125 830–840
126 2500–2570
127 880–915
128 1749.9–1784.9
129 1710–1770
Contact AVMS support
If you see this error message:
1. Check to see that you have a valid URL in
field is
the Server URL field.
2. Contact your IT Administrator, or if you want
the traffic to go through without verifying the
server certificate, change the setting in the
Services > AVMS >
icate field (described on
Disable.
Refer to the available AVMS server
documentation for a list of all possible error codes
and their significance.
AVMS server responses are mal-formatted.
Contact AVMS support
Downlink frequency range
(MHz)
2110–2170
1930–1990
1805–1880
2110–2155
869–894
875–885
2620–2690
925– 960
1844.9–1879.9
2110–2170
Corrective action
a
.
SSL Verify Peer Certif-
page 154) to
a
.
(MHz)
347