Tcp - Sierra Wireless AirLink ES440 User Manual

Table 10-2: Serial Port Configuration > Advanced
Field
IP List Dial
Keep Alive Mode
Keep Alive delay
Rev 1 Nov.14
Description
This allows access to the Modbus IP Address using the first two digits of the dial string. For
example, ATDT1234567 would imply ID index 12 on the Modbus Address list and use the
associated IP Address as the destination. Options are:
•
Disable (default)
•
Enable
You can also use an AT command to configure this field. See
When this feature is enabled, the AirLink device reboots if there is no traffic for longer than
the period configured in the Keep Alive Delay field. Options are"
•
Disable (default)
•
Enable
When Keep Alive Mode is enabled, use this field to set the delay (in minutes) before the
AirLink device reboots if there is no traffic on the serial port. Accepted values:
•
10–65535 (Default is 10.)

TCP

Figure 10-3: ACEmanager: Serial > Port Configuration > TCP
Serial Configuration
IPL on page 322.
215