Reset To Factory Default Settings - Sierra Wireless FX30 User Manual

Sierra Wireless FX30 User Guide
Rev 4 March 2019

Reset to Factory Default Settings

Warning:
Resetting the gateway to the factory default settings will remove all customized
configuration settings in /etc and /data, including the root password.
Warning:
Performing a factory reset could result in your FX30 no longer automatically
connecting to AVMS. If you perform a factory reset, please issue the AT command
AT+WDSC=3,60 to ensure your device checks in to AVMS every 60 minutes.
To reset the FX30 to the factory default settings:
1. Ensure that the Recovery Activation status is set to Enable. (See
Reset AT Commands
2. Upon applying power, press and hold the reset button for about 10 seconds.
Factory reset button
Figure 2-25: Factory reset button
36
on page 71.)
Factory
41110030