Authentication - Nortel BES50GE-12T PWR User Manual

50 series business ethernet switch
Table of Contents

Advertisement

Feature
Rate limiting
Port mirroring
Port trunking
Broadcast storm control
Static address
IEEE 802.1D bridge
Store-and-forward switching
Spanning Tree Protocol
Virtual LANs
Traffic prioritization
The switch provides a wide range of advanced performance-enhancing
features. Flow control eliminates the loss of packets due to bottlenecks
caused by port saturation. Broadcast storm suppression prevents broadcast
traffic storms from engulfing the network. Untagged (port-based) and
tagged Virtual Local Area Networks (VLANs), plus support for automatic
Generic VLAN Registration Protocol (GVRP), provide traffic security
and efficient use of network bandwidth. CoS priority queueing ensures
the minimum delay for moving real-time multimedia data across the
network. Some of the management features are briefly described in the
following sections. For further information see,
fundamentals" (page

Authentication

The switch authenticates management access through a Web browser.
User names and passwords can be configured locally or can be verified
through a remote authentication server (the Remote Authentication Dial-In
User Server [RADIUS]). Port-based authentication is also supported through
the IEEE 802.1X protocol. This protocol uses the Extensible Authentication
Protocol over LANs (EAPOL) to request user credentials from the 802.1X
client, and then uses the Extensible Authentication Protocol (EAP) between
the switch and the authentication server to verify the client's right to access
the network through an authentication server (that is, the RADIUS server).
Other authentication options include Simple Network Management Protocol
(SNMP) Version 3, IP address filtering for SNMP/Web-based user interface
management access, and MAC address filtering for port access.
Copyright © 2006, Nortel Networks
.
Description
Input and output rate limiting per port
One or more ports mirrored to single analysis port
Supports port trunking using either static or dynamic trunking
(LACP)
Supported
Up to 8K MAC addresses in the forwarding table
Supports dynamic data switching and address learning
Supported to ensure wire-speed switching while eliminating bad
frames
Supports standard STP and Rapid Spanning Tree Protocol (RSTP)
Up to 32 using IEEE 802.1Q, port-based, or private VLANs
Default port priority, traffic class map, queue scheduling,
Differentiated Services Code Point (DSCP), and TCP/UDP port
139).
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
Key software features 129
"BES50 advanced features
Nortel Networks Confidential

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bes50ge-24t pwrBes50fe-24t pwrBes50fe-12t pwr

Table of Contents