4
Setting Power over Ethernet
Use these procedures to configure the DC power settings for the switch.
Navigation
•
•
Setting the switch power budget
Use this procedure to define the Power over Ethernet (PoE) power budget
for the switch.
You can define a maximum PoE power budget for the switch (power
available to all switch ports) so that power can be centrally managed,
preventing overload conditions at the power source. If the power demand
from devices connected to the switch exceeds the power budget setting, the
switch uses port power priority settings to limit the supplied power.
Procedure steps
Step
1
2
3
Copyright © 2006, Nortel Networks
.
Click Submit.
"Setting the switch power budget" (page 63)
"Configuring port PoE power priorities" (page 64)
Action
From the main menu, choose Configuration > PoE > Power
Configuration.
Type the desired power allocation.
Nortel recommends that you leave this value at the default setting of
84 watts.
Click Submit.
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
Setting Power over Ethernet 63
—End—
ATTENTION
—End—
SMB
Nortel Networks Confidential