Configuring Ports And Trunks; Configuring Interface Connections - Nortel BES50GE-12T PWR User Manual

Object label
swIpFilterRejectTrap
swSmtpConnFailure
Trap
pethPsePortOnOff
Notification
pethPsePortPower
MaintenanceStatus
Notification
pethMainPower
UsageOnNotification
pethMainPower
UsageOffNotification
Configuring ports and trunks
Use these procedures to configure ports and trunks. In this section, the
term interface describes ports and trunks.
Navigation
•
•
Configuring interface connections
Use the Port Configuration or Trunk Configuration page to enable or
disable an interface, to set autonegotiation and the interface capabilities to
advertise, or to manually fix the speed, duplex mode, and flow control.
Procedure steps
Step
1
2
Copyright © 2006, Nortel Networks
.
Object ID
1.3.6.1.4.1.202.20.28
.63.2.1.0.40
1.3.6.1.4.1.202.20.41
.63.2.1.0.40
1.3.6.1.4.1.202.20.28
.63.2.1.0.411.3.6.1.4
.1.202.20.41.63.2.1.0
.41
1.3.6.1.4.1.202.20.41
.63.2.1.0.43
1.3.6.1.4.1.202.20.41
.63.2.1.0.44
1.3.6.1.4.1.202.20.41
.63.2.1.0.45
1.3.6.1.4.1.202.20.41
.63.2.1.0.46
"Configuring interface connections" (page 55)
"Creating trunk groups" (page 56)
Action
From the main menu, choose Configuration > Port > Port
Configuration or choose Configuration > Port > Trunk
Configuration.
Modify the required interface settings.
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
Configuring ports and trunks 55
Description
This trap is sent when an incorrect IP address is
rejected by the IP filter.
This trap is triggered if the SMTP system
cannot open a connection to the mail server
successfully.
This notification indicates if a Power Sourcing
Equipment (PSE) port is delivering power to the
Powered Device (PD). This notification is sent
on every status change except in search mode.
This notification indicates a port change status
and is sent on every status change.
This notification indicates that the PSE
Threshold usage indication is on. The power
usage is above the threshold.
This notification indicates that the PSE
Threshold usage indication is off. The power
usage is below the threshold.
SMB
Nortel Networks Confidential