Configuring Rate Limits - Nortel BES50GE-12T PWR User Manual

62 BES50 advanced features configuration
2
3
Variable definitions
Variable
Mirror Sessions
Source Port
Type
Target Port
Configuring rate limits
Use this procedure to configure the input and output rate limits for ports
and trunks.
Procedure steps
Step
1
2
3
Copyright © 2006, Nortel Networks
.
Select the source port, type, and target port to mirror.
Click Add.
Value
Lists current mirror sessions.
Select the port for traffic monitoring. (Range: 1 to 12 for 12-port
switches, and 1 to 24 for 24-port switches.)
Select the traffic to mirror to the target port. (Options: Rx [receive],
Tx [transmit], or Both [receive and transmit]. Default: Rx)
Select the port that will mirror the traffic from the source port.
(Range: 1 to 12 for 12-port switches, and 1 to 24 for 24-port
switches.)
Action
From the main menu, choose Rate Limit then choose one of the
following options:
a. Input Port Configuration
For BES50FE-12/24T only:
b. Input Trunk Configuration
c. Output Port Configuration
d. Output Trunk Configuration
For each port and trunk, select the Rate Limit Status check box.
(Default: Disabled)
For each port and trunk, type the input rate limit:
• Fast Ethernet default rate: 100 Mb/s
•
Gigabit Ethernet default rate: 1000 Mb/s
• Fast Ethernet range: 1 to 100 Mb/s
• Gigabit Ethernet range: 1 to 1000 Mb/s
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
—End—
Nortel Networks Confidential