Setting Broadcast Storm Thresholds - Nortel BES50GE-12T PWR User Manual

50 series business ethernet switch
Table of Contents

Advertisement

60 BES50 advanced features configuration
3
Variable definitions
Variable
Set Port Actor
Port
System Priority
Admin Key
Port Priority
Set Port Partner

Setting broadcast storm thresholds

Use this procedure to set the level of broadcast traffic on all ports and
trunks on the BES50.
Broadcast control does not affect IP multicast traffic.
Copyright © 2006, Nortel Networks
.
You can optionally configure these settings for the port partner. Be aware
that these settings only affect the administrative state of the partner and
do not take effect until the next time an aggregate link is formed with
this device.
Click Submit.
Value
This menu sets the local side of an aggregate link; that is, the
ports on this switch.
Port number. (Range: 1 to 12 for 12-port switches, and 1 to 24 for
24-port switches.)
Enter the LACP system priority used to determine Link Aggregation
Group (LAG) membership and to identify this device to other
switches during LAG negotiations.
Ports must be configured with the same system priority to join the
same LAG. System priority is combined with the MAC address to
form the LAG identifier. This identifier is used to indicate a specific
LAG during LACP negotiations with other systems. (Range: 0 to
65 535. Default: 32 768)
Enter the same value for ports that belong to the same LAG.
(Range: 0 to 65535. Default: 1)
Enter the value to determine the LACP port priority backup link, if
a link goes down. (Range: 0 to 65 535. Default: 32 768)
This menu sets the remote side of an aggregate link; that is, the
ports on the attached device. The command attributes are the
same as those used for the port actor. However, configuring LACP
settings for the partner only applies to its administrative state,
not its operational state, and only takes effect the next time an
aggregate link is established with the partner.
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
ATTENTION
—End—
Nortel Networks Confidential

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bes50ge-24t pwrBes50fe-24t pwrBes50fe-12t pwr

Table of Contents