Configuring Port Poe Power Priorities - Nortel BES50GE-12T PWR User Manual

64 BES50 advanced features configuration
Variable definitions
Variable
Power Allocation
Configuring port PoE power priorities
Use this procedure to set up the powering priorities for the ports.
Procedure steps
Step
1
2
3
4
Variable definitions
Variable
Port
Admin Status
Priority
Power Allocation
Copyright © 2006, Nortel Networks
.
Value
Enter the power budget for the switch. If devices connected to
the switch require more power than the switch budget, the port
power priority settings control the supplied power. (Range: 37
to 84 watts. Default: 84 watts)
Action
From the main menu, choose Configuration > PoE > Power Port
Configuration.
Select the Enabled check box on the required ports.
Select the Priority and type the required Power Allocation value.
Click Submit.
Value
The port number on the switch.
Select to enable PoE power on the port. Power is automatically
supplied when a device is detected on the port, providing that
the power demanded does not exceed the switch or port power
budget. (Default: Enabled)
If the power required by a device exceeds the power budget
of the port, the power is not supplied.
Select the power priority for the port. (Default: low)
Type the power budget amount for the port. (Default: 15400
milliwatts)
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
—End—
ATTENTION
Nortel Networks Confidential