3
4
5
Variable definitions
Variable
Action
Policy Name
Description
Class Name
Action (in Policy Rules
Setting)
Meter
Exceed
Configuring service policy settings
Use this procedure to configure ingress for policies.
Prerequisites
•
Procedure steps
Step
1
2
3
4
Copyright © 2006, Nortel Networks
.
In the Policy Map—Add page, define a policy name and description.
Click Submit.
In the Policy Rule Settings page, choose a class name, set the
priority, and define the meter and exceed settings.
Value
Select to specify which class map to work with.
Enter a name for the policy map.
Enter a description for the policy map.
Select a class map.
Set and define either CoS, IP DSCP, or IP Precedence.
Set the meter rate and burst.
Set or drop IP DSCP.
A policy map must be configured. See
82).
Action
From the main menu, choose Applications > QoS > DiffServ >
Service Policy Settings.
Select the port.
Select the Enable check box and select a policy map.
Click Submit.
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
Configuring Quality Of Service (QoS) 83
—End—
"Configuring policy maps" (page
—End—
SMB
Nortel Networks Confidential