Configuring Access Control Lists; Configuring An Access Control List - Nortel BES50GE-12T PWR User Manual

90 BES50 advanced features configuration
Variable
TX Period
Authorized
Supplicant
Trunk
Configuring Access Control Lists
Use these procedures to configure Access Control Lists (ACL) to provide
packet filtering for IP frames (based on address, protocol, Layer 4 protocol
port number, or TCP control code). To filter incoming packets, first create an
access list, add the required rules, specify a mask to modify the precedence
in which the rules are checked, and then bind the list to a specific port.
Navigation
•
•
Configuring an Access Control List
Use this procedure to designate the name and type of an ACL, and to
configure ACLs.
Procedure steps
Step
1
2
3
4
5
Copyright © 2006, Nortel Networks
.
Value
Type the time period during an authentication session that the
switch waits before retransmitting an EAP packet. (Range: 1 to
65 535. Default: 30 seconds.)
Indicates client authorization mode:
• Yes—Connected client is authorized.
• No—Connected client is not authorized.
• Blank—Displays nothing when 802.1x is disabled on a port.
Indicates the MAC address of a connected client.
Indicates if the port is configured as a trunk port.
"Configuring an Access Control List" (page 90)
"Binding a port to an Access Control List" (page 93)
Action
From the main menu, choose Administration > Security > ACL >
ACL Configuration.
Type a name for the ACL.
Select an ACL type.
Click Submit.
The configuration page for the selected ACL type appears.
To configure a Standard ACL:
a. Select the action.
b. Select the address type.
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
SMB
Nortel Networks Confidential