Setting Up The Web-Based User Interface - Nortel BES50GE-12T PWR User Manual

18 Using the Web-based user interface
Navigation
•
•
•
•
•
•
•
•

Setting up the Web-based user interface

Nortel recommends that you follow the procedures in this section regarding
Web-based user interface prerequisites before you use the management
features of your switch for the first time.
Procedure steps
Step
1
2
3
Copyright © 2006, Nortel Networks
.
"Setting up the Web-based user interface" (page 18)
"Logging on to the Web-based user interface" (page 19)
"Logging off from the Web-based user interface" (page 19)
"Navigating the Web-based user interface" (page 20)
"Initial configuration" (page 22)
"Changing the administrator password" (page 23)
"Adding system information" (page 24)
"Setting the IP address" (page 24)
Action
Check that Java Runtime Environment (JRE) version 1.5.0_07-b03
or later is installed on your PC. Download the latest version from
www.java.com if required.
The menu on left side of the Web-based user interface may not appear if
the Java Runtime Environment (JRE) is not installed.
Ensure the software programs on your PC enable Java script and
Java applets. Refer to the corresponding software documentation for
instructions. Software programs include but are not limited to:
• Web browser
• firewall
• software that controls Java behavior
The menu on left side of the Web-based user interface may not appear if
Java script and Java applets are disabled.
Ensure the software programs on your PC enable Web browser
pop-up dialog boxes. Refer to the corresponding software
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
ATTENTION
ATTENTION
SMB
Nortel Networks Confidential