Configuring Policy Maps - Nortel BES50GE-12T PWR User Manual

82 BES50 advanced features configuration
2
3
4
5
Variable definitions
Variable
Action
Class Name
Type
Description
For BES50FE-12/24T only
ACL List
For BES50GE-12/24T only
IP DSCP (0-63)
Source IP
Destination IP
Priority
Source MAC
Destination MAC
Configuring policy maps
Use the Policy Map page to remove a class, update the name and
description, or edit the rules for a policy map.
Procedure steps
Step
1
2
Copyright © 2006, Nortel Networks
.
Click Add Class to add a new class map.
In the Class Map—Add page, define a class name, type, and
description.
Click Submit.
In the Class Map—Match Class Settings page, define the IP
DSCP, IP precedence, and VLAN.
Value
Specifies which class map to work with.
Name given to the class map.
Type for the class map is match-any.
Description for the class map.
Select an ACL list.
Define an IP DSCP priority. Maps Layer 3/4 priorities by using
Differentiated Services Code Point Mapping.
Filters packets matching a specified source IP address.
Filters packets matching a specified destination IP address.
The priority that is assigned to untagged frames received on the
specified interface.
Filters packets matching a specified source MAC address.
Filters packets matching a specified destination MAC address.
Action
From the main menu, choose Applications > QoS > DiffServ >
Policy Map.
Click Add Policy to add a new policy map.
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
—End—
Nortel Networks Confidential