Configuring User Accounts - Nortel BES50GE-12T PWR User Manual

30 BES50 basic configuration
•
•
•
Configuring user accounts
Use the User Accounts page to manually configure management access
rights for users.
The administrator has write access for all parameters governing the onboard
agent. Assign a new administrator password as soon as possible, and store
it in a safe place.
See
Procedure steps
Step
1
2
3
To change the password for a specific user, enter the user name and new
password, and then confirm the password by entering it again.
Variable definitions
Variable
Account List
New Account
User Name
Copyright © 2006, Nortel Networks
.
Use "Configuring local and remote logon authentication" (page 31)
remotely configure users access rights.
Use "Configuring port security" (page 32)
for individual ports.
Use "Configuring 802.1X port authentication" (page 87)
access to specific ports.
"Changing the administrator password" (page
Action
From the main menu, choose Administration > Security > User
Accounts.
To configure a new user account, enter the user name, access level,
and password. (The default administrator name is nnadmin with
the password PlsChgMe!.)
Click Add.
Value
The current list of user accounts and associated access levels.
(Default user name: nnadmin; default password: PlsChgMe!)
Enter the name of the user. (Maximum length: 8 characters;
maximum number of users: 16)
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
to Configure secure addresses
ATTENTION
—End—
SMB
to
to control
23).
Nortel Networks Confidential