Deleting Files; Setting The Startup Code - Nortel BES50GE-12T PWR User Manual

116 BES50 administration
Variable definitions
Variable
TFTP Server IP Address
File Type
Source File Name
Destination File Name
Deleting files
Use this procedure to delete files from the switch.
Procedure steps
Step
1
2
3

Setting the startup code

Use this procedure to set the startup code.
Procedure steps
Step
1
2
Copyright © 2006, Nortel Networks
.
Value
Enter the TFTP server IP address.
Select Image for operational code or Config for configuration file.
Type in the source file name. The file name must not contain
slashes (\ or /), the leading letter of the file name must not be a
period (.), and the maximum length for file names is 32 characters
for files on the switch. (Valid characters: A-Z, a-z, 0-9, .,-, _)
Type in the file name of the switch runtime image to overwrite,
or type a new file name.
Action
From the main menu, choose Configuration > File > Delete.
Select the check box beside the name of the file that you want to
delete.
Click Submit.
You cannot delete the file currently designated as the startup code.
Action
If you download to a new destination file, choose Configuration >
File > Set Start-Up.
Mark the operation code file used at startup, and click Submit.
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
ATTENTION
—End—
Nortel Networks Confidential