Configuring Vlan Behavior For Interfaces - Nortel BES50GE-12T PWR User Manual

Variable definitions
Variable
Interface
Member
Non-Member
Configuring VLAN behavior for interfaces
Use this procedure to configure VLAN behavior for specific interfaces,
including the default Port VLAN Identifier (PVID), accepted frame types,
ingress filtering, GVRP status, and Generic Attribute Resolution Protocol
(GARP) timers.
GARP VLAN Registration Protocol defines a way for switches to exchange
VLAN information to automatically register VLAN members on interfaces
across the network.
GVRP and GARP Multicast Registration Protocol (GMRP) use GARP to
register or deregister client attributes for client services within a bridged
LAN. The default values for the GARP timers are independent of the media
access method or data rate. Do not change these values unless you are
experiencing difficulties with GMRP or GVRP registration or deregistration.
Prerequisites
•
•
Procedure steps
Step
1
2
3
Copyright © 2006, Nortel Networks
.
Value
Port or trunk identifier.
VLANs for which the selected interface is a tagged member.
VLANs for which the selected interface is not a tagged member.
At least one port on the switch must be a member of the VLAN.
At least one member port of the VLAN must be in the Spanning Tree
Protocol Forwarding state.
Action
From the main menu, choose Application > VLAN > 802.1Q VLAN
> Port Configuration or choose Application > VLAN > 802.1Q
VLAN > Trunk Configuration.
Select the required settings for each Port and Trunk Interface.
Click Submit.
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
Configuring IEEE 802.1Q VLANs 73
—End—
—End—
SMB
Nortel Networks Confidential