Binding A Port To An Access Control List - Nortel BES50GE-12T PWR User Manual

Binding a port to an Access Control List

After you configure the Access Control Lists (ACL), you can bind the ports
that need to filter traffic to the appropriate ACLs. The switch supports ACLs
for only ingress filtering. However, you can only bind one IP ACL to any port
for ingress filtering. This means that only one ACL can be bound to an
interface—Ingress IP ACL.
Prerequisites
•
•
Procedure steps
Step
1
2
3
4
Variable definitions
Variable
Port
IP (Ingress)
Copyright © 2006, Nortel Networks
.
ACL must be configured before you can bind it to a port.
A mask must be configured for an ACL.
If the IP address type is Any, the mask is automatically generated.
Action
From the main menu, choose Administration > Security > ACL >
Port Binding.
Select the Enable check box for the port you want to bind to an
ACL for ingress traffic.
Select the required ACL.
Click Submit.
Value
Fixed port or optional module, or SFP port. (Range: 1 to 26)
Select the Enabled check box and select the IP ACL to bind to
a port.
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
Configuring Access Control Lists
—End—
SMB
93
Nortel Networks Confidential