Nortel BES50GE-12T PWR User Manual page 104

104 BES50 administration
RMON groups 2, 3, and 9 can only be accessed by using Simple Network
Management Protocol (SNMP) management software.
Port Statistics table
Parameter
Interface Statistics
Received Octets
Received Unicast Packets
Received Multicast Packets
Received Broadcast Packets
Received Discarded Packets
Received Unknown Packets
Received Errors
Transmit Octets
Transmit Unicast Packets
Transmit Multicast Packets
Transmit Broadcast Packets
Transmit Discarded Packets
Transmit Errors
Etherlike Statistics
Alignment Errors
Copyright © 2006, Nortel Networks
.
Description
The total number of octets received on the interface, including
framing characters.
The number of subnetwork-unicast packets delivered to a higher
layer protocol.
The number of packets delivered by this sublayer to a higher
(sub)layer, addressed to a multicast address at this sublayer.
The number of packets delivered by this sublayer to a higher
(sub)layer, addressed to a broadcast address at this sublayer.
The number of inbound packets chosen to be discarded even
though no errors were detected to prevent their being deliverable
to a higher layer protocol. A packet can be discarded to free up
buffer space.
The number of packets received by the interface that were
discarded because of an unknown or unsupported protocol.
The number of inbound packets that contained errors preventing
them from being deliverable to a higher layer protocol.
The total number of octets transmitted out of the interface,
including framing characters.
The total number of packets that higher level protocols requested
be transmitted to a subnetwork-unicast address, including those
that were discarded or not sent.
The total number of packets that higher level protocols requested
be transmitted, and which were addressed to a multicast address
at this sublayer, including those that were discarded or not sent.
The total number of packets that higher level protocols requested
be transmitted, and which were addressed to a broadcast address
at this sublayer, including those that were discarded or not sent.
The number of outbound packets that were chosen to be discarded
even though no errors are detected to prevent their being
transmitted. A packet can be discarded to free up buffer space.
The number of outbound packets that could not be transmitted
because of errors.
The number of alignment errors (missynchronized data packets).
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
ATTENTION
Nortel Networks Confidential