Nortel BES50GE-12T PWR User Manual page 34

34 BES50 basic configuration
Severe error messages logged to flash memory are permanently stored in
the switch to assist in troubleshooting network problems. The flash memory
can store up to 4096 log entries with the oldest entries being overwritten
first when the available log memory exceeds 256 kilobytes.
Procedure steps
Step
1
2
3
4
Variable definitions
Variable
System Log Status
Flash Level
RAM Level
Event level messages table
Level Severity
Name
7 Debug
6
Informational
5
Notice
4 Warning
Copyright © 2006, Nortel Networks
.
Action
From the main menu choose Configuration > Log > System Logs.
Select the System Log Status Enabled check box.
Type the event level for flash and RAM. See the
messages table" (page
The flash level must not exceed the RAM level.
Click Submit.
Value
Select to enable the logging of debug or error messages to the
logging process.
Enter the highest level of log message to save to the switch
permanent flash memory. For example, specify level 3 to log all
messages from level 0 to level 3 to flash. (Range: 0 to 7. Default:
3)
Enter the highest level of log message to save to the switch
temporary RAM memory. For example, specify level 7 to log all
messages from level 0 to level 7 to RAM. (Range: 0 to 7. Default:
7)
Description
Debugging messages
Informational messages only
Normal but significant condition, such as cold start
Warning conditions (such as return false, or unexpected
return)
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
34).
ATTENTION
—End—
"Event level
Nortel Networks Confidential