Setting Static Addresses; Voice Vlan Configuration; Configuring Voice Vlan On The Bes50 (Global Setting) - Nortel BES50GE-12T PWR User Manual

Setting static addresses

Use this procedure to assign MAC addresses to a specific interface on the
switch. You can assign multiple MAC addresses to one port.
Procedure steps
Step
1
2
3
Variable definitions
Variable
Static Address Counts
Current Static Address Table
Interface
VLAN
MAC Address
Voice VLAN configuration
Use these procedures to manually configure voice VLAN.
Navigation
•
•
Configuring voice VLAN on the BES50 (global setting)
Use the Voice VLAN Global Configuration page to manually configure voice
VLAN for the switch.
Procedure steps
Step
1
Copyright © 2006, Nortel Networks
.
Action
From the main menu, choose Applications > Address Table >
Static Addresses.
Specify the interface, the MAC address, and the VLAN.
Click Add.
Value
The number of manually configured addresses.
List of current static addresses.
Select to indicate the port or trunk associated with the device
assigned a static address.
Select the ID of the configured VLAN. (Range: 1 to 4 094)
Type the physical address of a device mapped to this interface.
"Configuring voice VLAN on the BES50 (global setting)" (page 85)
"Configuring voice VLAN on ports" (page 86)
Action
From the main menu, choose Applications > Auto Device
Detection > Voice VLAN > Global Settings.
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
—End—
SMB
Voice VLAN configuration 85
Nortel Networks Confidential