Nortel BES50GE-12T PWR User Manual page 38

38 BES50 basic configuration
Procedure steps
Step
1
2
3
4
5
Variable definitions
Variable
Set Time
Manual
Automatic
Copyright © 2006, Nortel Networks
.
Action
From the main menu, choose Applications > SNTP.
In the Automatic table, select the Daylight Saving check box, and
then select the daylight saving configuration type. (USA, Europe,
Custom)
In the Time Set Offset field, type the number of minutes to offset the
original time to achieve daylight saving time. (This value is typically
set to 60 minutes.)
If you select Custom as the daylight saving configuration type, type
the start and end date and time in the FROM and TO fields, or select
the Recurring check box to configure a custom recurring daylight
saving time.
Click Submit.
Value
Select the method for setting the system time. (Options: set
the system time manually or set the system time automatically
using SNTP.)
For manual time setting, enter the time and date.
If the time is set manually, the system clock resets each time
the switch is rebooted.
For automatic time setting, configure the switch so the SNTP
automatically sets the time and date. Enter the values for the
parameters as required.
• Time Zone—Select your time zone.
•
Daylight Saving—Select the daylight saving configuration
type. (Options: USA, Europe, or Custom)
• Time Set Offset—For custom settings, enter the time offset
from the time zone.
•
Recurring—Select to use the daylight saving feature for a
specific time period.
• From/To—Enter the applicable dates and times for daylight
saving use.
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
—End—
Nortel Networks Confidential