Configuring Event Logging; Configuring The System Logs - Nortel BES50GE-12T PWR User Manual

If a port is disabled (shut down) due to a security violation, it must be manually
reenabled from the Port/Port Configuration page.
Procedure steps
Step
1
2
3
Variable definitions
Variable
Port
Name
Security Status
Trunk
LACP
Configuring event logging
Use these procedures to control the logging of error messages, including
the type of events recorded in switch memory, and logging to a remote
System Log (syslog) server.
Navigation
•
•
Configuring the system logs
Use the System Logs page to configure system messages logged to flash
or RAM memory.
Copyright © 2006, Nortel Networks
.
Action
From the main menu, choose Administration > Security > Port
Security.
Select the check box in the Security Status column to enable
security for a port.
Click Submit.
Value
Port number.
Descriptive text.
Select to enable port security on the port. (Default: Disabled)
Trunk number if port is a member.
Indicates whether Link Aggregation Control Protocol (LACP) is
enabled or disabled.
"Configuring the system logs" (page 33)
"Configuring the remote logs" (page 35)
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
ATTENTION
—End—
SMB
Configuring event logging 33
Nortel Networks Confidential