Table of Contents
Advertisement
Management – Firmware Update:
Updating the base's firmware
If necessary, you can load updates of the base firmware onto your base.
The server on which new firmware versions are generally available to download to
your base is set by default. The URL of the Internet server is displayed in the Data
server field.
Please note
u
You should only change this URL under exceptional circumstances (e.g., if
requested to do so due to a malfunction). This address is also used to load
VoIP provider information from the Internet. You should therefore make a
note of the default URL before you overwrite it. Otherwise, you will only be
able to reactivate the default URL by resetting the base back to the default
settings.
u
When updating from the Internet, checks are made to ensure that no new
version of the firmware exists. If this is not the case, the operation is termi-
nated. You will receive a message to this effect.
u
The firmware is only loaded from the Internet if you have not entered a local
file in the User defined firmware file field prior to the update.
Starting the firmware update manually
Prerequisites:
u
The base has a connection to the Internet.
u
No calls are being made via ISDN, the fixed line network or VoIP.
u
There is no internal connection between the base and registered handsets.
u
No handset has the base menu open.
¤
Open the Settings
¤
Select the Update Firmware button.
If a newer firmware version is available, this is loaded to the base. Your connection
to the Web configurator is terminated, and the base is rebooted.
This process can take up to 3 minutes.
¢
¢
Management
Firmware Update Web page.
63
Advertisement
Table of Contents
