Operating With Other Devices; Registering Handsets - Gigaset CX203 isdn Manual

Hide thumbs Also See for Gigaset CX203 isdn:
Table of Contents

Advertisement

Operating with other devices

On your base station, you can register up to six cordless devices (including Gigaset data
modules (page 123) and Gigaset Repeater (page 122)).
You must initiate registration of a cordless device on the base station and on the
cordless device itself. The internal numbers 11 to 16 are reserved for the cordless
devices. If these internal numbers have already been assigned on your telephone, de-
register a handset you no longer require before registering a new one (page 122).

Registering handsets

When you have prepared the base station for registration, it remains so for approx.
30 seconds. Therefore you should prepare the handset for registration before starting
preparation of the base station.
1. On the base station
i
s
Set base
s
Settings
s
Setup user
s
Register device
The base station is only ready for registration for as long as Registration
proced.running is shown in the display (approx. 30 seconds).
2. On the handset (within 30 sec.)
Register the handset as described in the relevant operating instructions.
After registration the handset reverts to idle status. The handset's internal number is
shown in the display.
The next unassigned internal number between Int.11 and Int.16 is automatically
assigned to the handset as it is registered.
If the handset terminates the base search, e.g. because the registration
i
time has been exceeded, repeat the process.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Operating with other devices
117

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gigaset 253 isdnCx203 isdnCx253 isdn

Table of Contents