Setting The Internal Clock - Gigaset 5040 Quick Manual

Preparing the telephone for use
Recommended installation of telephone
◆
Do not expose the telephone to direct sunlight or
other sources of heat.
◆
Operate at temperatures between +5°C and +40°C.
◆
Maintain a distance of at least one metre between
the telephone and radio equipment, e.g. wireless
telephones, wireless pagers or TV sets. Otherwise,
telephone communication could be impaired.
◆
Do not install the telephone in dusty areas as this can
shorten the service life of the telephone.
◆
To clean, wipe with a moist or antistatic cloth only,
never with a dry cloth (risk of electrostatic charging
and discharge) or harsh cleaning agent.
◆
Furniture lacquer and polish can be damaged by
contact with parts of the unit (e.g. device feet).
Connecting
Insert the short end of the coiled handset cord in the
a
socket provided in the handset and the long end in the
socket marked with an
device. Plug the phone cord into the outlet on the wall
and the other end into the socket marked
underside of the device. Plug the mains adapter cable
into the power supply socket on the underside of the
device and plug the adapter itself into a mains socket.
Your telephone is now ready to use.
on the underside of the
Y
on the
3
en
Apart from the Loudspeaker key, the display and keypad
illumination will not work when the power supply is
unplugged.

Setting the internal clock

º3
Press the Set key for 2 seconds.
Initiate function.
The current set time is displayed in 24-hour
o
mode (default setting: 00:00).
Enter the time in hours <hh> and minutes
º
<mm> (24-hour mode).
Hold down the Set key.
If successful you will hear a positive confirmation tone.