Cleaning The Document Feeder Roller - Fuji Xerox DocuCentre-II 2055 User Manual

15 Maintenance

Cleaning the Document Feeder Roller

If the machine is equipped with a document feeder and if the document feeder roller is
dirty, streaks or smears may appear on copies and paper jams may occur.
To ensure clean copies at all times, clean the document feeder roller about once a
month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
1
Pull up the knob on the left cover of
the document feeder, and open the
document feeder cover completely.
Note
2
While turning the roller, gently
clean it with a soft cloth moistened
with water.
Important • Do not use cleaning agents
15
Note
3
Close the left cover of the document feeder until it clicks into place.
432
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying or printing.
• When you fully open the
cover, it enters a fixed
position. Open the cover
gently.
other than water or neutral
detergent.
• Use a cloth firmly wrung to
prevent water drops from
falling into the machine. If
water gets into the machine, it
may cause machine malfunction.
• If dirt does not come off easily, gently wipe it with a soft cloth moistened with a small amount
of neutral detergent.