Fuji Xerox DocuCentre-II 2055 User Manual page 554

17 Appendix
Setting Item
Output
destination
Tray 5
confirmation
Grid lines
2 Sided printing
Font
Print control
17
552
Item
Number
9 Sets the output tray where the output will be delivered.
[0] (Default)
[1]
[2]
[80]
67 Prints from Tray 5 (Bypass), after instructing to print and then operating
the machine to start printing.
[0] (Default)
[1]
22 Sets the method for printing 2-byte grid lines. The options are as follows.
[0] (Default)
[1]
12 Sets the 2-sided printing.
[0] (Default)
[1]
[2]
Important • When [Postcard] is selected for [Paper Size], [Head to Head] and
Note • This feature does not appear for some models. An optional package
14 Sets the font for 1-byte characters (ANK).
(alphanumeric [0] (Default)
font) [1]
Important • Since this feature selects the default value, its setting will not be
51 Sets whether to print blank pages if included in the original.
(Blank sheet [0] (Default)
output) [1]
Note • Even when [Off] is selected, blank pages will be printed if they are
• If [Off] is selected, and if 2 Up or 2-sided printing is specified, blank
52 Extends the position of the right margin.
(Character [0] (Default)
print area) [1]
Important • If the character print area is changed from [Extended] to [Standard],
• When the position of the right margin is set here, that position will be
53 Sets whether or not to enable the Image Enhancement feature.
(Image Image Enhancement makes border between black and white smooth,
enhancement) with rough edges reduced, giving the appearance of higher resolution.
[0]
[1] (Default)
Value
: Center Tray
: Side Tray (optional)
: Center Tray - Lower (optional)
: Finisher Tray (optional)
: Off
: On
: Image
: Font
: Off
: Head to Head
: Head to Toe
[Head to Toe] cannot be selected.
is necessary. For more information, contact our Customer Support
Center.
: Roman
: Sanserif
affected when an extended command is received.
: Off
: On
spaces created with user-defined characters or images in white
color.
pages will not be printed.
: Standard
: Extended
the left and right margins will be initialized to the default values.
the right edge of the character print area.
: Off
: On