Booklet Creation (Creating A Booklet) - Fuji Xerox DocuCentre-II 2055 User Manual

Booklet Creation (Creating a Booklet)

This feature lays out pages so that booklets are formed when the output sheets are
folded in half. You can also set the binding shift and attach a cover when making
booklets.
Important • Ensure that the orientation of the document and the [Original Orientation] setting of the
Note • This feature does not appear for some models. An optional package is necessary. For more
• If the number of pages in the booklet is not a multiple of four, the remaining pages will be
1
Select [Booklet Creation].
2
Select any item.
Off
Booklet Creation is not applied to copies.
On Create Booklet
Copies are made to enable left binding or top binding.
On - Right Bind Create Booklet
Copies are made to enable right binding.
Binding Shift
Displays the [Booklet Creation-Binding Shift] screen.
Refer to "[Booklet Creation-Binding Shift] Screen" (P.77).
Covers
Displays the [Booklet Creation-Covers] screen.
Refer to "[Booklet Creation-Covers] Screen" (P.78).
Divide Output
Displays the [Booklet Creation-Divide Output ] screen.
Refer to "[Booklet Creation-Divide Output] screen" (P.78).
Last Page on Back Cover
The last page of the original is used as the back cover of the booklet. Select the check
box to use the last page as the back cover. When using [Divide Output] to separate
booklets, the cover will be made on the last page of the last subset.
Note • Depending on the number of pages in the original, a blank sheet may be inserted before the
[Booklet Creation-Binding Shift] Screen
You can set the value within the range from 0 to 50 mm in 1 mm increments.
1
Use [ ] and [
binding shift value.
[Layout Adjustment] screen are the same.
information, contact our Customer Support Center.
output as blank pages.
last page.
] to specify a
Output Format
3
77