Fuji Xerox DocuCentre-II 2055 User Manual page 446

16 Problem Solving
The copy is
misaligned or
skewed.
Part of the image
is missing on the
copy.
16
The copy has a
stripe pattern.
Printing is faint.
(smudged,
unclear)
444
Symptom Cause
Is the document loaded
correctly?
Is the paper loaded correctly
in the tray?
Are the paper guides of the
Tray 5 (Bypass) correctly
aligned with the paper?
Are the document guides on
the document feeder in the
correct positions?
Is the paper tray inserted
correctly?
Is the paper damp?
Is folded or wrinkled paper
included in the tray?
Is the document pasted or
folded?
Is the enlargement ratio
large?
Symptom Cause
The paper is damp.
The drum cartridge has
deteriorated or is damaged.
There is no toner left in the
toner cartridge.
Remedy
Load the document correctly.
Refer to "Step 1 Loading Documents" (P.50).
Load the paper correctly.
Refer to "Loading Paper in the Trays 1 to 4"
(P.249).
Load the paper correctly.
Refer to "Loading Paper in the Tray 5
(Bypass)" (P.250).
Load the document correctly, and align the
document guides with the document sides.
Refer to "Step 1 Loading Documents" (P.50).
Firmly push in the tray as far as possible to
insert it properly.
Refer to "Loading Paper in the Trays 1 to 4"
(P.249).
If the paper is damp, the copy image may
be partially missing or unclear. Replace the
paper with new one.
Refer to "Loading Paper" (P.249).
Remove the improper paper or replace
whole paper with new one.
Refer to "Loading Paper" (P.249).
There may be a gap between the
document glass and the pasted or folded
section. Place a stack of white sheets on
the document to remove the gap between
the document and the document glass.
Output may have vertical stripes
depending on the ratio. Adjust the ratio to
remove the stripes.
Refer to "Reduce/Enlarge (Making Enlarged/
Reduced Copies)" (P.58).
Remedy
Replace the paper with new one.
Refer to "Loading Paper" (P.249).
Replace the drum cartridge with a new
one.
Refer to "Replacing Drum Cartridge (for
customers having a spot maintenance
contract)" (P.423).
Replace the toner cartridge with a new
one.
Refer to "Replacing Consumables" (P.420).