Fuji Xerox DocuCentre-II 2055 User Manual page 474

16 Problem Solving
Error Code
016-704
016-705
16
016-706
016-707
016-708
016-710
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
472
Category
C P F S M O
O [Cause]
[Remedy] Remove unnecessary documents from the mailbox, and
Refer to "Printing/Deleting Documents in the Mailbox" (P.208).
O O [Cause]
[Remedy] For 1), press the <All Services> button, and check if [Scan
O [Cause]
[Remedy] Remove unnecessary documents from the machine, and
For information about Secure Print, refer to "Secure Print" (P.370). For
information about mailboxes, refer to "Printing/Deleting Documents in the
Mailbox" (P.208).
O [Cause]
[Remedy] A HDD Extension Kit is required for the Sample Print
O [Cause]
[Remedy] Remove unnecessary data from the hard disk to increase
O [Cause]
[Remedy] HDD Extension Kit is required to use the Delayed Print
Cause and Remedy
The mailbox is full, and hard disk capacity is insufficient.
save the document.
One of the following may be the cause:
1) You have specified the mailbox registry for the scanned
document to the machine. However, optional Scanner Kit
is not installed.
2) You have not used the print driver for this machine.
3) The machine received a Secure Print, Mailbox Print,
Charge Print, or Private Print job with no HDD Extension
Kit installed.
to PC] is displayed. If [Scan to PC] is displayed, then
check if the scanned document can be stored in a mailbox.
If unable to store in the mailbox, install optional Scanner
Kit.
For 2), use the print driver appropriate for this machine.
For 3), Check if the HDD Extension Kit is installed on the
machine.
- If the HDD Extension Kit is not installed and you do not
need to use the feature, select [off] under [Hard Disk] on
the [Printer] tab of the print driver.
- If the HDD Extension Kit is not installed and you need to
use the feature, install the HDD Extension Kit.
- If the HDD Extension Kit is installed and you need to use
the feature, select [on] under [Hard Disk] on the [Printer]
tab of the print driver.
If the error persists even after following the listed solutions,
contact our Customer Support Center.
The hard disk space is insufficient because Secure Print
users exceeded the allowed number.
delete unnecessary Secure Print users.
Unable to print with the Sample Print feature because a
HDD Extension Kit is unattached or defective.
feature. If the HDD Extension Kit is defective, contact our
Customer Support Center.
Unable to annotate due to insufficient hard disk space.
free disk space.
Unable to register the Delayed Print document because
HDD Extension Kit is unattached.
feature.