Operations During Scanning; Stopping The Scan Job - Fuji Xerox DocuCentre-II 2055 User Manual

5 Scan

Operations during Scanning

The following describes the operations available during scanning. The following shows
the reference for each operation.

Stopping the Scan Job ...............................................................................................................172

Changing the Scan Settings.......................................................................................................173
Stopping the Scan Job
To cancel scanning a document, follow the procedure below.
1
Press either [Stop] on the touch
screen or the <Stop> button on the
control panel.
5
2
Select [Cancel].
Note
If the screen shown in step 2 does not appear even after you press the <Stop>
button on the control panel:
Depending on the jobs in progress, screens for canceling jobs may not appear. In that
case, use the following procedure to cancel a scan job on a job status screen.
1
Press the <Job Status> button.
172
• If two or more jobs are in
progress, a confirmation
screen appears for each job.
Select [Start] or [Cancel]
depending on whether you
want to start or cancel the job.
1 2 3
4 5 6
7 8 9
0 #
C
1 2 3
4 5 6
7 8 9
0 #
C
<Stop> button
<Job Status>
button