Fuji Xerox DocuCentre-II 2055 User Manual page 23

Never push objects of any kind into slots or openings on the equipment.
Do not place any of the followings on the machine:
Liquid container such as a vase or coffee cup
Metal parts such as staples or clips
Heavy object
When those are spilled over, slipped into or fall from the machine, it can cause
electric shock, fire or injury.
Do not use conductive paper, e.g. carbonic paper or coated paper. When
paper jam occurs, they can cause a short-circuit and fire.
Always use materials specified for this product. The use of other materials may
result in poor performance and may create a hazardous situation. Do not use
aerosol cleaners, they may be explosive and flammable under certain
circumstances.
Never play a CD-ROM supplied with the product on an audio player. Be sure
to use CD-ROM player. Otherwise, large sound may give an damage to your
ears or to your speakers.
Laser Safety
CAUTION: Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous light exposure.
With specific regard to laser safety, the equipment complies with performance
standards for laser products set by government, national and international
agencies as a Class 1 laser product. It does not emit hazardous light, as the
beam is totally enclosed during all phases of customer operation and
maintenance.
Always follow all warnings and instructions that are marked on or supplied with
the equipment.
Do not override or disable electrical or mechanical interlocks. Do not place a
magnet near the safety switch of the machine. A magnet can activate the
machine accidentally, resulting in injuries.
The machine has a circuit breaker. In the event of a current leakage, the
breaker will automatically cut off the power circuit to prevent any leakages or
fire.
The breaker is normally On ("|").
Once a month, check the breaker for correct operation by using the following
procedure.
1) Press the Test button. The breaker switch is turned Off ("O"). (This means
that the breaker is OK.)
2) Return the breaker switch to On ("|").
If you notice any unusual condition, contact your Fuji Xerox Customer Support
Center.
When removing jammed paper, do not try to remove paper or paper piece
deep inside the machine. Also, do not try to remove paper wrapped around the
heat roller. It can cause injury or burn.
Switch off the machine immediately and contact your Fuji Xerox Customer
Support Center.
Never touch the paper output area of the finisher during operation. It might
cause an injury.
Safety Notes
1
21