Fuji Xerox DocuCentre-II 2055 User Manual page 471

Category
Error Code
C P F S M O
016-577
016-578
016-579
016-580
016-581
016-582
016-583
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
O [Cause] Unable to connect to the FTP service of the destination
server.
[Remedy]Take one of the following actions:
Check if the FTP service of the server is activated.
Check if the FTP port number of the server is correctly
registered on the machine.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature due to unsuccessful login to the FTP
server.
[Remedy] Check if the login name (user name) and password are
correct.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the scanned image could
not be saved in the FTP server after connection.
[Remedy] Check if the FTP server's save location is correct.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the file or folder name on the
FTP server could not be retrieved after connection.
[Remedy] Check the access privilege to the FTP server.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the suffix of the file or folder
name exceeded the limit after connection.
[Remedy] Change the file name, or change the destination folder on
the FTP server. Or, move or delete files from the
destination folder.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because file creation was not
successful on the FTP server after connection.
[Remedy] Take one of the following actions:
Check if the specified file name can be used in the save
location.
Check if enough space is available in the save location.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because lock folder creation was not
successful on the FTP server after connection.
[Remedy] Take one of the following actions:
If any lock directory (.LCK) exists in the forwarding
destination, delete it manually, then try executing the job
again.
Check if the specified folder name can be used in the
save location.
Check if the same folder name exists in the save
location.
Check if enough space is available in the save location.
Cause and Remedy
Error Code
16
469