Registering Stored Program; Deleting A Stored Program - Fuji Xerox DocuCentre-II 2055 User Manual

7 Stored Programming

Registering Stored Program

Up to 58 actions can be registered with one stored program. Up to 40 stored programs
can be registered in the machine.
One touch buttons M01 to M20 are associated with stored programs 1 to 20,
respectively.
The following is the procedure for registering actions with stored programs.
Important • If registered settings such as tray paper size and comments, or default values in the system
1
Select [Store].
2
Select the number to register.
Note
3
Set the feature you want to register.
Note
You can change the volume of the sound that notifies of stored program registration. For information on
the settings, refer to "Stored Programming Tone" (P.277).
4
Press the <Start> button or <Clear All> button.
If no name is entered for a registered stored program, the name becomes "No Name".
For information on how to name a registered stored program, refer to "Entering/Changing a Stored
Program Name" (P.219).

Deleting a Stored Program

7
The following is the procedure for deleting stored programs.
1
Select [Delete].
2
Select the number to delete.
Note
3
Select [Yes].
Yes
Deletes the stored program.
Note
No
Cancels deleting the stored program.
218
settings are changed after a stored program is registered, then the program's content also
changes.
• Once a job is stored to a
button, it cannot be
overwritten.
• Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
• Press the <Interrupt> button to cancel registration.
• The machine produces an audible tone while a stored program is registered.
• Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
• Deleted stored programs cannot be restored.