Fuji Xerox DocuCentre-II 2055 User Manual page 318

11 System Settings
Memory Full Procedure
While scanning an original, if there is insufficient hard disk space for the scanner, a screen
appears, asking how the partly stored data should be handled.
Once a certain time has elapsed with the confirmation screen displayed, the subsequent
processing is determined by these settings.
You can set the time until the memory full procedure is carried out. For more information, refer to Auto
Job Release (P.275).
Cancel Job
The stored data is discarded.
Run Job
The read-in data is treated as valid, and the part of the original read in is treated as a
complete stored file.
11
Maximum Stored Pages
Set the maximum number of stored pages of a scan original. You can specify a number from
1 to 999 pages.
TIFF Format
Set the TIFF format for scanned data. You can select [TIFF V6] or [TTN2].
Image Transfer Screen
Select whether to display a message when the scan of an original is completed.
Disabled
Does not show a scan completion message.
Display Message Only
Shows a scan completion message.
Display Message and Screen
Shows a screen while original is being scanned, and also a scan completion message.
316